MudShield 32 oz Water-Based Concrete Release and Equipment Protectant Spray

MudShield Concrete Release & Anti-Corrosion Formula

MudShield™ is a professional-grade, biodegradable concrete release and anti-corrosion solution designed to prevent concrete buildup on forms, tools, equipment, and vehicles while guarding against rust and wear. Available in ready-to-use and concentrate formulas across multiple sizes — from grab-and-go spray bottles to bulk totes built for large-scale operations.

Key Features

• Professional-grade release agent: Prevents concrete from sticking to forms, mixers, tools, and equipment.
• Built-in corrosion protection: Guards against rust, oxidation, and surface damage.
• Two formula options: Ready-to-use (RTU) for immediate application, or concentrate for maximum coverage and value.
• Smooth, even coverage: Engineered for a thin, uniform film that reduces stuck-on residue and rust.
• Extends equipment life: Keeps tools and machinery clean and in peak working condition.
• Biodegradable and surface-safe: Water-based, low VOC, and safe for wood, metal, plastic, foam, rubber, glass, and electrical components when used as directed.
• Repels tough jobsite buildup: Blocks asphalt, concrete, slurry, paint splatter, mud, and debris from bonding to surfaces.

Available Sizes

Ready-to-Use (RTU)

• 32 oz. — Built-in sprayer included. Perfect for small jobs and daily maintenance.
• 32 oz. (Case of 6) — Six grab-and-go bottles, ready for crew distribution.

Concentrate

• 32 oz. — Makes up to 4 gallons of RTU solution.
• 32 oz. (Case of 6) — Six bottles make up to 18 gallons of RTU solution.
• 1 Gallon — Makes up to 12 gallons of RTU solution.
• 1 Gallon (4-Pack) — Four bottles make up to 48 gallons of RTU solution.
• 5 Gallon — Makes up to 60 gallons of RTU solution.
• 55 Gallon — Polyethylene drum makes up to 660 gallons of RTU solution.
• 275 Gallon — HDPE bulk tote with one 2 in. valve (NPS threads) makes up to 3,300 gallons of RTU solution.

Concentrate Mix Ratios

• Typical dilution: 1:11 to 1:15 (concentrate → water) — apply a thin, uniform film; avoid pooling
• Non-porous forms (steel, ABS, fiberglass): up to 2,000 sq ft/gal at 1:15
• Wood and foam (MDO, LDO, EPS): 1,000–1,500 sq ft/gal at 1:11

How To Use

Ready-to-Use:

1. Apply: Spray directly onto a clean, dry surface using the built-in sprayer.
2. Coat: Allow to cover evenly before exposure to concrete, asphalt, or debris.
3. Repeat: Reapply as needed between pours or after heavy use.

Concentrate:

1. Mix: Dilute with clean water at your desired ratio — do not mix with fuels or oils.
2. Apply: Mist a thin, even coat with a pump sprayer; wipe off any excess to avoid pooling.
3. Wait: Allow to turn clear before use.
4. Reapply: Repeat after each use for best ongoing protection.

Safety Note

Always wear gloves and eye protection. Review the product's SDS before use. Always test in a small, inconspicuous area first. California Residents: See Prop 65 WARNINGS.